Saturday, 19 October 2019

Vibrating Rod Detector


The rod is permanently excited by 2 piezo-electric oscillators. The mechanical oscillations are converted into an electrical signal used as a reference. When the product reaches the rod, the mechanical vibration stops and leads to a variation in the potential of the oscillating crystal and the switching of the signal relay.

Version :

Integrate or remote
High temperature
Atex (only with standard lenght)

Technical Data :



Power supply

230 VAC – 50-60 Hz / Option : from 20 to 250 VAC and VCC


0.78 VA

Standard output of relay

1 SPDT free contact 250 Vac / 10 A

Time delay on operation

1 second

Time delay on reset

2 to 5 seconds

Indication of switching

DEL on P.C.B


Cast aluminium


IP 55

Working temperature

- 30°C à + 80°C

Probe construction

Stainless steel AISI 304


1’’1/2 shaped DIN 2399


2 kgfor CV 120

Minimum material density

0,03 gr/cm3

Material temperature

- 30°C to + 60°C

Maximum working pressure

10 bars


Horizontal or vertical

Main Advantages :

  • High temperature version (up to 150°C)
  • Diamond shape rod to avoid any product deposit
  • Adapted to low density product
  • Extension available (according to the version)
  • Adjustable sensivity
  • Maximum working pressure 10 bars



June 5-6, 2019, Curitiba, Parana (Brazil) :

SEMTEC 6º Seminário Técnico da Indústria do Cimento e Cal


September 16-20, 2019, Prague, Czech Republic :

15th International Congress on the Chemistery of Cement.


02-04 October 2019, Montpellier (France)

SIM Exhibition 68th
Congress of the mineral industry Society

Symphos 7-9 October 2019 – Benguérir (Marrakech) Morocco

The 5th edition of the International Symposium on Innovation and Technology in the Phosphate Industry will be held on October 7th to 9th at the Mohammed 6 Polytechnic University of Benguérir.
Philippe Davin will present a paper “Introduction to the Sampling World: technical and cost impacts…”


November 8-9, 2019, Antalya (Turkey):
TCMB Turkish Cement Manufacturer’s Association


3-6 May 2020, Vancouver (Canada) :

CIM Convention.