Saturday, 19 October 2019

Hot Meal Sampler PC303


Integrated quenching system designed to froze the decarbonation reaction, and therefore make sure there is no further loss of CO2

Description :

This PC 303 sampler is designed to collect hot meal from underneath the last stage of cyclones of the precalciner.

It is composed of a sampling head made in refractory steel, a driving jack, a sampling chamber closing device, several compressed air ports used to clean the sampling head and a collecting hopper.

A quenching system composed of a screw conveyor (length: 800 mm) and a cooling fan with a silencer is associated to the sampler.

Specifications :
  • Ce préleveur peut être contrôlé soit à distance par un de nos analyseurs, soit localement par un coffret de commande indépendant
  • This sampler can either be controlled remotely in conjunction with one of our analyzers or locally through an independent control cabinet
  • In the resting position, the tip of the sampler is protected by cooled (and thus hardened) hot meal that serves as a plug
  • Air used to quench the sample is also used for the thermal protection of the sampler nose
  • Sampling head diameter : 80 mm
  • Sampler weight : 180 kg
  • Sample volume : 300 to 400 cm3C
  • Maximum sample temperature : 1 150°C
  • Power of the cooling fan : 2,4 kW
  • Power of the screw conveyor: 0,25 kW
  • Alimentation électrique : toute tension de 380 à 600 V ; 50-60 Hz
  • Power supply: any from 380 to 600 V; 50-60 Hz
  • Compressed air supply: 6 bars, clean & dry
  • Air consumption : 5 litres / cycle

Additional Equipments :
  • Sampling automation
  • Sample transport
  • Sample storage
  • Preparation and analysis



June 5-6, 2019, Curitiba, Parana (Brazil) :

SEMTEC 6º Seminário Técnico da Indústria do Cimento e Cal


September 16-20, 2019, Prague, Czech Republic :

15th International Congress on the Chemistery of Cement.


02-04 October 2019, Montpellier (France)

SIM Exhibition 68th
Congress of the mineral industry Society

Symphos 7-9 October 2019 – Benguérir (Marrakech) Morocco

The 5th edition of the International Symposium on Innovation and Technology in the Phosphate Industry will be held on October 7th to 9th at the Mohammed 6 Polytechnic University of Benguérir.
Philippe Davin will present a paper “Introduction to the Sampling World: technical and cost impacts…”


November 8-9, 2019, Antalya (Turkey):
TCMB Turkish Cement Manufacturer’s Association


3-6 May 2020, Vancouver (Canada) :

CIM Convention.